2024
1 |
B-Site Co-Doping Coupled with Additive Passivation Pushes the Efficiency of Pb–Sn Mixed Inorganic Perovskite Solar Cells to Over 17% |
2 |
Sensitive Organic Photodetectors With Spectral Response up to 1.3 μm using a Quinoidal Molecular Semiconductor |
3 |
Marine Amoebae-Inspired Salting Hydrogels to Reconfigure Anisotropy for Reprogrammable Shape Morphing |
4 |
Catalytic Edges in One-Dimensional Covalent Organic Frameworks for the Oxygen Reduction Reaction |
5 |
CO2-promoted photocatalytic arylmigration from nitrogen to carbon for switchable transformation of N-arylpropiolamides |
6 |
High-efficiency organic solar cells from low-cost pentacyclic fused-ring electron acceptors via crystal engineering |
7 |
Scaling Up Stability: Navigating from Lab Insights to Robust Oxygen Evolution Electrocatalysts for Industrial Water Electrolysis |
8 |
Pushing the Operation Current Density of Alkaline Water Oxidation above 1 A cm2 via Electrocatalyst Engineering |
9 |
Dynamical transfer behavior and in situ interaction with H2O molecules of charge carriers over heterojunction in non-adiabatic systems |
10 |
Optimization of d-p band centers as efficient active sites for solar energy conversion into H2 by tuning surface atomic arrangement |
11 |
Defect Management and Ion Infiltration Barrier Enable High-Performance Perovskite solar cells |
12 |
The electron-withdrawing properties of butanesultone-based polymer electrolytes facilitate stable operation at 4.6 V for solid-state lithium batteries with NCM811 cathodes |
13 |
In situ construction of an electron-withdrawing polymer coating layer on NCM811 interface for high-performance lithium-ion batteries |
14 |
Regeneration of spent graphite via graphite-like turbostratic carbon coating for advanced Li ion battery anode |
15 |
A small amount of sodium difluoro(oxalate)borate additive induces anion-derived interphases for sodium-ion batteries |
16 |
Safe, Facile, and Straightforward Fabrication of Poly(N-vinyl imidazole)/Polyacrylonitrile Nanofiber Modified Separator as Efficient Polysulfide Barrier Toward Durable Lithium–Sulfur Batteries |
17 |
Pyridyl Porphyrin as Electrocatalyst: Regulating the Redox Conversion of Lithium Polysulfides under Voltage |
18 |
Piezocatalysts and Piezo-Photocatalysts: From Material Design to Diverse Applications |
19 |
Pyridyl Porphyrin as Electrocatalyst: Regulating the Redox Conversion of Lithium Polysulfides under Voltage |
20 |
Searching for breakthrough in seesaw-like contradictions to achieve high-efficiency solar-driven overall water splitting |
21 |
Advances in application of sustainable lignocellulosic materials for high-performance aqueous zinc-ion batteries |
22 |
Hollow spherical Na3.95Fe2.95V0.05(PO4)2P2O7 suppressing inactive Maricite-NaFePO4 with ultrahigh dynamics performance |
23 |
An asymmetric polymerized small molecular acceptor with temperature-dependent aggregation and superior batch-to-batch reproducibility for efficient all-polymer solar cells |
24 |
Alkali-Ion Intercalation Chemistry and Phase Evolution of Sn4P3 |
25 |
Standardizing isotope traceability in CO2 reduction |
26 |
S-scheme heterojunction with ultrafast interfacial electron transfer for artificial photosynthesis |
27 |
Activating d10 electronic configuration to regulate p-band centers as efficient active sites for solar energy conversion into H2 by surface atomic arrangement |
28 |
Solid-state synthesis and ion transport characteristics of the b-KSbF4 for all-solid-state fluoride-ion batteries |
29 |
Revealing the sodium storage mechanism of cellulose separator-derived hard carbon anode materials for sodium-ion batteries |
30 |
A type of polyaniline with H+ reservoirs for dual-mechanism NH4+ and I3-/ I2 storage |
31 |
Utilizing 2D layered structure Cu-g-C3N4 electrocatalyst for optimizing polysulfide conversion in wide-temperature Li-S batteries |
32 |
Construction of foam-like carbon microspheres with controllable pseudo-graphitic domains: Synergistic enhancement of K-ion adsorption/ intercalation storage |
33 |
Elevating perovskite efficiency via Machine Learning-Assisted screening of Passivators |
34 |
Continuous Flow Electrochemical Synthesis of Olivine-Structured NaFePO4 Cathode Material for Sodium-Ion Batteries from Recycle LiFePO4 |
35 |
Superstructured Carbon with Enhanced Kinetics for Zinc-Air Battery and Self-Powered Overall Water Splitting |
36 |
Modulating Surface Architecture and Electronic Conductivity of Li-rich Manganese-Based Cathode |
37 |
Continuous Flow Electrochemical Synthesis of Olivine-Structured NaFePO4 Cathode Material for Sodium-Ion Batteries from Recycle LiFePO4 |
38 |
A recyclable SERS-DGT device for in-situ sensing of sulfamethazine by Au@g-C3N4NS in water |
39 |
Ferromagnetic-Interaction-Induced Spin Symmetry Broken in Ruthenium Oxide for Enhanced Acidic Water Oxidation |
40 |
Localized CdS homojunctions with optimal ratio of high and low index facets to dynamically boost H2O splitting into H2 energy |
41 |
Synchronously regulating d- and p-band centers of heterojunction photocatalysts by strain effect for solar energy conversion into H2 |
42 |
Self-degradation functional unit introduction for anti-oxidation ability enhancement of Poly(vinyl ethylene carbonate) electrolyte |
43 |
Enhancing ionic conductivity and suppressing Li dendrite formation in lithium batteries using a vinylene-linked covalent organic framework solid polymer electrolyte |
44 |
Regulating energy band alignment for high-performance broadband perovskite photodetectors |
45 |
A new full-spectrum solar power system based on perovskite solar cell and thermally regenerative electrochemical cycle: Influential mechanism and performance limit |
46 |
A novel solar power generation hybrid system comprising evacuated U-tube solar collector and thermally regenerative thermocapacitive cycle |
47 |
Construction of direct Z-scheme Co9S8/CdS with tubular heterostructure through the simultaneous immobilization and in-situ reduction strategy for enhanced photocatalytic Cr(VI) reduction under visible light |
48 |
Dually boosting the performance of photovoltaic module via integrating elastocaloric cooler |
49 |
Innovative use of air gap membrane distillation to harvest waste heat from alkaline fuel cell for efficient freshwater production: A comprehensive 4E study, |
50 |
Performance prediction and enhancement strategy of a new proton exchange membrane fuel cell-hydrophilic modified tubular still hybrid system |
51 |
Synergizing perovskite solar cell and thermally regenerative thermocapacitive cycle toward full-spectrum solar energy conversion |
52 |
Synergizing perovskite solar cell and thermoelectric generator for broad-spectrum utilization: Model updating, performance assessment and optimization |
53 |
Unlocking the potentials using humidifier-dehumidifier for proton exchange membrane fuel cell waste heat recovery |
54 |
A novel photo-thermal-electric hybrid system comprising evacuated U-tube solar collector and inhomogeneous thermoelectric generator toward efficient and stable operation |
55 |
An innovative hybrid system for electricity and freshwater cogeneration: Integrating high-temperature PEM fuel cells with hydrophilic modified tubular distillers |
56 |
In Situ Construction of a Polymer Coating Layer on the LiNi0.8Co0.1Mn0.1O2 Cathode for High-Performance Lithium-Ion Batteries |
57 |
Dual Function of Hydrogen Bond and CEI to Enhanced Lithium-Ion Battery Performance |
58 |
ZIF-67 and Biomass-Derived N, S-Codoped Activated Carbon Composite Derivative for High-Effective Removal of Hydroquinone from Water |
59 |
Integration of proton exchange membrane fuel cell with air gap membrane distillation for sustainable electricity and freshwater cogeneration: Performance, influential mechanism, multi-objective optimization and future perspective |
60 |
Constructing a Cr-Substituted Co-Free Li-Rich Ternary Cathode with a Spinel-Layered Biphase Interface |
61 |
A Fused-Ring Electron Acceptor with Phthalimide-Based Ending Groups for Efficient Ternary Organic Solar Cells |
62 |
Carbazole-Based Dual-Band Electrochromic Polymers: The Effect of Linkage Sites on Electrochromic Performance |
63 |
Achieving the Inhibition of Aluminum Corrosion by Dual-Salt Electrolytes for Sodium-Ion Batteries |
64 |
Au depositing and Mg doping synergistically regulates an In2O3 photocatalyst for promoting CO2 reduction and CH4 exclusive generation |
65 |
NiCo2S4 nanosphere anchored on N, S co-doped activated carbon for high-performance asymmetric supercapacitors |
66 |
Improvement of ionic conductivity of solid polymer electrolyte based on Cu−Al bimetallic metal-organic framework fabricated through molecular grafting |
67 |
Novel high-ionic-conductivity solid polymer electrolyte based on Cu-Al bimetallic metal-organic framework fabricated through molecular |
68 |
A novel distributed solar refrigeration system based on evacuated U-tube solar collector and elastocaloric refrigerator |
69 |
Understanding the cascade heterojunction of CuPc/Bi-MOF for photoelectrochemical nitrate reduction |
70 |
CH4 Carbonylation to Acetic Acid Using H2O as an Oxidant on a Rh-Functionalized UiO-67 Combined with Oriented External Electric Fields: Selectivity and Mechanistic Insights from DFT Calculations. |
71 |
Lattice modulation strategy toward efficient and durable RuO2-based catalysts for acidic water oxidation |
72 |
Pluralistic Electronic Structure Modulation of Ruthenium Oxide for Enhanced Acidic Water Electrolysis |
73 |
Performance prediction and manipulation strategy of a hybrid system based on tubular solid oxide fuel cell and annular thermoelectric generator |
74 |
The study on the improvement of sodium-ion battery electrolyte performance by sulfur-based additive |
75 |
Recent development of electrode materials in semi-solid lithium redox flow batteries |
76 |
Discarded sulfuric acid paper-derived hard carbon as high-performance anode material for sodium-ion batteries |
77 |
Performance optimization and scheme evaluation of liquid cooling battery thermal management systems based on the entropy weight method |
78 |
Thermodynamic investigation of an integrated near-zero CO2 emission power generation system with SOFC, MGT, SCO2BC, and CO2 capture |
79 |
Synergizing alkaline fuel cell and thermocapacitive heat engine for hydrogen energy efficient utilization |
80 |
Enhanced photovoltaic performance of A–D–A’–D–A type non-fused ring electron acceptors via side chain engineering |
81 |
Synergistically regulating d-band centers of heterojunction redox sites by ligand effect for photocatalytic H2 evolution |
82 |
Tailoring SnO2 structures for enhanced Pd/SnO2 catalytic activity in low-concentration methane oxidation |
83 |
Comprehensive evaluation on the performance of a novel solar seawater desalination system |
84 |
Performance evaluation of a novel photo-thermal-electric hybrid system |
85 |
Performance analyses on the air cooling battery thermal management based on artificial neural networks |
86 |
Optimization and performance enhancement of a novel photovoltaic desalination system |
87 |
A review on defect modulated electrocatalysts for the oxygen evolution reaction |
88 |
Halogen substitution of perinone-based cathode interfacial materials for high-efficiency inverted perovskite solar cells |
89 |
Highly Efficient Integrated Perovskite/Organic Bulk-Heterojunction Solar Cells Combining Layer-By-Layer Processing Ternary Systems and Interface Modification |
90 |
Enhanced Photoelectrochemical Water Splitting through Synergistic Carrier Separation and Transfer in TiO2‑Ferrihydrite-Mxene Nanowire Arrays |
91 |
Continuous Flow-Electrochemical Coupling Technology for Metal Nanoparticle Synthesis: Applications for Catalysis |
92 |
Synthesis of a Ce–La Adsorbent with Large Adsorption Capacity for Efficient Fluoride Removal from Leaching Solution of Spent Lithium-Ion Batteries |
93 |
Review on electric resistance in proton exchange membrane fuel cells: Advances and outlook |
94 |
Nickel-hydroxide decorated trimanganese-tetroxide nanorods supported on graphene as bifunctional electrocatalyst for metal–air batteries |
95 |
In-situ N, P co-doped porous carbon derived from biomass waste for supercapacitors |
96 |
Elucidating the degradation mechanism of the nerve agent A-234 using various detergents: a theoretical investigation |
97 |
Analysis of main steam line break accident on a BWR test facility using TRACE |
98 |
A–D–A'–D–A type non-fused ring electron acceptors for efficient organic solar cells via synergistic molecular packing and orientation control |
99 |
Smart Electrolytes for Lithium Batteries with Reversible Thermal Protection at High Temperatures |
100 |
Optimally Splitting Solar Spectrums by Concentrating Solar Spectrums Splitter for Hydrogen Production via Solid Oxide Electrolysis Cell |
101 |
Stiffening of double-shelled fullerene molecules under uniaxial strains, Fullerenes Nanotubes and Carbon Nanostructures |
102 |
醇电催化氧化偶联制氢关键材料研究进展 |
103 |
氢能的未来:制氢、储氢和用氢中挑战和机遇 |
104 |
负载型纳米催化剂在炔烃选择性半加氢中的研究进展 |